Nissan Altima windshield wipers purchase, sizing & replacing guide

If you’re looking to buy new Nissan Altima windshield wipers, be sure to read our guide first. We’ll outline the different types of wipers available, as well as the dimensions of the windshield they should fit. We’ll also tell you how to size them for your car, and how to replace them if they need it.

What windshield wipers do I need for a Nissan Altima?

Nissan Altima windshield wipers are an important part of keeping your car clean and clear. They help remove rain, snow, and sleet from your windshield so you can see while driving. It is important to choose the right size wipers for your Nissan Altima. You also need to know how to replace them when they wear out.

There are two types of windshield wipers for the Nissan Altima: conventional and beam.

  • Conventional wipers have a metal frame that sits on top of the windshield. The blades are attached to the frame with rubber grommets.
  • Beam wipers have a plastic frame that sits inside the windshield recess. The blades are attached to the frame with metal brackets.

Nissan recommends using conventional wipers on the Altima sedan and coupe models. Beam wipers should be used on the SUV and crossover models. The size of the wiper blade is determined by the width of the windshield. The length of the blade should be at least 4 inches longer than the width of the windshield.

Nissan Altima windshield wipers

How to choose the best windshield wipers for a Nissan Altima?

There are a few things to consider when choosing windshield wipers for your car.

1. The first is the type of windshield wipers you need.

There are three types of wipers available for most cars: intermittent, continuous, and oscillating.

  • Intermittent wipers use a series of short, quick strokes to move the water droplets across the windshield.
  • Continuous wipers use a long, slow sweep to move the water droplets across the windshield.
  • Oscillating wipers use a series of short, quick strokes to move the water droplets in a circular motion.

2. The next thing to consider is the size of the windshield.

Most windshield wipers are designed for a specific size of windshield. If you have a larger windshield, you will need to buy a larger wiper. If you have a smaller windshield, you will need to buy a smaller wiper.

3. The last thing to consider is the type of wiper blade you need.

There are three types of wiper blades available: rubber, metal, and plastic. Rubber wiper blades are the cheapest and are the least effective. Metal wiper blades are the most effective and are the most expensive. Plastic wiper blades are the least effective and are the cheapest.

After you have determined the type of windshield wipers you need, the size of the wiper, and the type of wiper blade, you can choose the best windshield wipers for your car.

Top 5 Nissan Altima windshield wipers for you

Here are the top 5 windshield wipers for Nissan Altima and you can click these links to choose the right one for you,

  1. Michelin RainForce Windshield Wiper Blade – Frame Style – 17″
  2. Michelin RainForce Windshield Wiper Blade – Frame Style – 28″
  3. ClearPlus Sentinel Windshield Wiper Blade – Frame Style – 28″
  4. ClearPlus Sentinel Windshield Wiper Blade – Frame Style – 16″ 
  5. ClearPlus Intelli Curve Windshield Wiper Blade – Hybrid Style – 28″ 

What size are the windshield wipers for Nissan Altima?

If your Nissan Altima is like most vehicles on the road, the windshield wipers are probably one of the last things you think about. But when they need to be replaced, it’s important to know what size you need.

Windshield wipers come in a variety of sizes, so it’s important to measure your current ones before purchasing new ones. The easiest way to do this is to remove the wiper blades and take them with you to the store.

Once you have the measurements, select a size that is slightly longer than your current ones. This will ensure that they provide adequate coverage for your windshield. If you can’t find a size that is long enough, consider buying a set of two different sizes and installing them side by side.

2018 Nissan Altima windshield wipers size

Car Driver Pass. Attach
2018 Nissan Altima 28 in. 16 in. 9mm Small Hook 9×3

2017 Nissan Altima windshield wipers size

Car Driver Pass. Attach
2017 Nissan Altima 28 in. 16 in. 9mm Small Hook 9×3

2016 Nissan Altima windshield wipers size

Car Driver Pass. Attach
2016 Nissan Altima 28 in. 16 in. 9mm Small Hook 9×3

2015 Nissan Altima windshield wipers size

Car Driver Pass. Attach
2015 Nissan Altima 28 in. 16 in. 9mm Small Hook 9×3

Nissan Altima windshield wiper replacement guide

When it comes to replacing your Nissan Altima’s windshield wipers, there are a few things you need to take into account. In this guide, we’ll go over everything you need to know about purchasing and replacing your Altima’s windshield wipers, from sizing to installation.

Nissan Altima windshield wipers

How to install Nissan Altima windshield wipers?

If you own a Nissan Altima, you may need to install windshield wipers. This guide will show you how to do it.

  1. First, remove the windshield wipers from the car. On some models, you may need to use a tool to remove them. If you don’t have a tool, you can use your hands.
  2. Next, unscrew the screws that hold the wiper arms in place. You may need a Phillips screwdriver to do this.
  3. Now, remove the arms from the wiper mechanism. You may need to use a pair of pliers to do this.
  4. Finally, install the new arms into the wiper mechanism. You may need to use a screwdriver to do this.

How to remove windshield wipers on a Nissan Altima?

Assuming you would like content for a blog titled “How to remove windshield wipers on a Nissan Altima”: If your windshield wipers are leaving streaks on your windshield or they aren’t wiping properly, it’s probably time to replace them. In this guide, we’ll show you how to remove the old wipers and install new ones on a Nissan Altima.

To remove your windshield wipers on a Nissan Altima, you will need to do:

  1. First locate the windshield wiper arms. The arms are located on either side of the windshield, and are attached to the vehicle with two small bolts. Using a wrench or socket, remove the bolts and lift the wiper arm off of the vehicle.
  2. Next, locate the windshield wiper motor. The motor is located behind the center of the grille, and is held in place with two small bolts. Using a wrench or socket, remove the bolts and pull the motor out of its housing.
  3. Finally, disconnect the electrical connector from the back of the motor. With all three components removed, you can now access and replace your windshield wipers.

Where to buy the Nissan Altima windshield wipers replacement?

If your Nissan Altima is due for a windshield wiper replacement, you may be wondering where to buy them. You have a few options, each option has its own set of pros and cons, so it’s important to weigh your options before making a purchase:

1. Order them online from a reputable retailer like Amazon.com or CARiD.com.

Buying online is usually the most convenient option, but you’ll want to make sure you’re getting a good deal and that the retailer is reputable.

2. Buy them in person from your local auto parts store, like AutoZone or Advance Auto Parts.

Buying in person can be more expensive, but you’ll be able to see the product and ensure it’s the right size for your car before you buy it.

3. Ask your Nissan dealer if they sell replacement windshield wipers for the Altima model.

Asking your Nissan dealer is always an option, but they may not always have what you need in stock and their prices may be higher than other retailers.

Nissan Altima windshield wipers troubleshooting

If you’re having trouble with your Nissan Altima’s windshield wipers, there are a few things you can do to troubleshoot the issue.

Nissan Altima windshield wipers not working

If your Nissan Altima’s windshield wipers are not working, it may be due to a problem with the wiper motor, the wiper linkage, or the wiper blades.

If the problem is with the wiper motor, you will need to replace it. If the problem is with the wiper linkage, you will need to either lubricate it or replace it. If the problem is with the wiper blades, you will need to either clean them or replace them.

To determine which of these is the problem, you can first try cleaning or replacing the wiper blades. If that does not fix the problem, then you can check the wiper motor and linkage for problems.

Replacing the windshield wipers on your Nissan Altima is a relatively easy task that can be done at home with just a few tools. You will need a new set of windshield wipers (the correct size for your vehicle), a screwdriver, and a socket wrench.

  1. First, remove the old windshield wipers by pulling them off of the armature. Then, clean off any dirt or debris from the armature so that the new wipers will have a smooth surface to attach to.
  2. Next, take one of the new wipers and line it up with the holes in the armature. Secure it in place withthe screwdriver and socket wrench. Repeat this process forthe other new wiper.
  3. Finally, test out the new windshield wipers by.

Nissan Altima windshield wipers stopped working

If your Nissan Altima’s windshield wipers have stopped working, it’s important to troubleshoot the problem as soon as possible. Depending on the cause, you may be able to fix the issue yourself or you may need to purchase a new windshield wiper assembly.

If your windshield wipers are not working, the first thing you should check is the windshield wiper fluid level. If the fluid is low, simply refill it and see if that solves the problem. If the fluid level is fine, then move on to checking the fuse for the windshield wipers.

The fuse is located in the fuse box under the hood of your car. If the fuse is blown, replace it with a new one and see if that solves the problem. If neither of those solutions works, then it’s likely that you need to replace your windshield wiper motor assembly. You can purchase a new assembly from your local auto parts store or online.

Once you have the new assembly, follow these instructions to install it:

  1. Remove the old wiper motor assembly by unscrewing the two bolts that hold it in place.
  2. Disconnect the electrical connector from the old assembly and connect it to the new one.
  3. Bolt the new assembly into place and make sure it is secure.
  4. Reconnect your car’s battery and test out The new wipers to make sure they work properly before driving your car again.

Nissan Altima windshield wipers

Summary

We hope that this guide has helped you in your purchase, sizing and replacement of your Nissan Altima windshield wipers. We know that it can be daunting to figure out which size and type of wiper is right for your car, but we hope that this guide has made the process a little bit easier.